ALIGN USHES35P01 Trex Brushless Esc Governer 35A RCE-BL35G

( Brand: Align ), ( Manufacturer Part Number: USHES35P01 ), ( Country/region Of Manufacture: Taiwan )

Review ALIGN Trex 35a Brushless Esc Governer Mode

The Ushee SHS35P01 Align Trex 35A Brushless ESC Governor RCE-BL35G HES35P01 is a high-performance electronic speed controller (ESC) designed specifically for RC hobbyists and racers. This ESC is compatible with the Trex 35A brushless motor and is equipped with a built-in governor to ensure stable and consistent power delivery, making it ideal for high-speed racing and stunt applications.

The SHS35P01 features a 35A continuous rating and a 120A burst rating, providing ample power for even the most demanding RC applications. It is equipped with a 4-in-1 sensorless BLDC motor driver, which eliminates the need for external sensors and simplifies setup. This ESC also supports both 3S and 4S LiPo battery packs, giving you the flexibility to choose the power source that best suits your needs.

The governor feature of the SHS35P01 ensures that the motor receives a consistent and stable amount of power, which is essential for maintaining control and preventing motor burnout during high-speed racing or stunt applications. The governor can be adjusted to suit your specific application, allowing you to fine-tune the power delivery for optimal performance.

The SHS35P01 is also equipped with a BEC (Battery Eliminator Circuit) that provides up to 6A of regulated power, which can be used to power your RC vehicle's receiver and other accessories. This ESC also features adjustable timing and throttle curves, giving you the ability to fine-tune the power delivery for optimal performance.

The SHS35P01 is built to withstand the rigors of high-speed RC racing and stunt applications. It is made of high-quality materials and is designed to be waterproof, making it ideal for use in wet and muddy conditions. The ESC also features a low-voltage cutoff feature to protect the battery and motor from damage in the event of a low battery voltage.

In summary, the Ushee SHS35P01 Align Trex 35A Brushless ESC Governor RCE-BL35G HES35P01 is a high-performance ESC that is ideal for use with the Trex 35A brushless motor. Its built-in governor ensures stable and consistent power delivery, while its 4-in-1 sensorless BLDC motor driver eliminates the need for external sensors. The SHS35P01 is also equipped with a BEC, adjustable timing and throttle curves, and is built to withstand the rigors of high-speed RC racing and stunt applications.

1. High Power Efficiency: The brushless ESC (Electronic Speed Controller) provides high power efficiency, which can help in improving the overall performance of your RC car or drone.

2. Adjustable Settings: The ESC comes with adjustable settings that allow you to fine-tune the speed and power output according to your specific needs and preferences.

3. Durable Construction: The USHES35P01 is built to last with a robust and durable construction, ensuring that it can withstand the rigors of frequent use.

4. Compatibility: The ESC is compatible with a wide range of RC vehicles, making it a versatile option for hobbyists and enthusiasts.

5. Easy Installation: The ESC is relatively easy to install, making it a good choice for beginners or those who are new to RC hobbies.

1. Price: The USHES35P01 is not the cheapest option on the market, which might be a deterrent for some budget-conscious buyers.

2. Learning Curve: While the ESC is relatively easy to install, it does come with adjustable settings that can be complex for beginners to understand and manage.

3. Potential for Damage: As with any electronic device, misuse or improper handling can lead to damage, which may not be covered under the warranty.

The USHES35P01 Align Trex 35A Brushless ESC Governor RCE-BL35G HES35P01 is a high-quality ESC that offers a good balance of power, efficiency, and versatility. Its adjustable settings allow for customization, while its durable construction ensures long-term use. However, its price and potential complexity might be turn-offs for some buyers. If you're looking for a reliable and powerful ESC for your RC vehicle, the USHES35P01 is a solid choice. Just make sure to read the instructions thoroughly and take the necessary precautions to avoid damage.

Details:

If the aircraft should land or crash in an unexpected location and become lost, pilot can enable locator option. Large heat sink for great thermal performance. This option will not work with a Cm receiver that has save function enabled, or low noise resistant pm receivers.

The sound of alarm will aid pilot to locate aircraft. Beck power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. Three programmable throttle speed settings to support quick response. Specification: continuous current:35 amps surge current:45 amps for 15 seconds supporting motor types:2 poles to 10 in out runner brushless motors maximum rpm:2 poles 190,000rpm input voltage :5.

Governer mode governor speed controller slow down system. High compatibility to work with 98 brushless motors in the market. Ultra smooth motor start design to run with all kinds of brushless motors. Small and compact PCB design for ease of installation.

The aircraft locator option is engaged by timing off transmitter. Feature: Beck output voltage 5 6v to show great performance on the torque speed of servo. Users can use the transmitter to operate motor setting by super stylized CPU. When the esc does not receive a signal from transmitter for 30 seconds, it will start to send an alarm motor.

It provides better noise filtering capability than other bl esc in the market, and moreover to give more stable performance of r c receiver Beck.

part #: ushes35p01 price

• $29.95

specifications radiocontrolother:

• brand: Align
• mpn: Ushes35p01
• country/region of manufacture: Taiwan

Seller radiocontrolother:

• zipcode: 92860
• city: Norco, California

Payments radiocontrolother:

• PayPal

Ratings:

1. thanks 03-12-17
2. awsone 100% good 03-12-17
3. Great seller. 03-12-17
4. Great seller, couldn't have been better. 03-12-17
5. super fast A 03-13-17

Offer radiocontrolother:

• quantity: 1
• Started: March 13, 2017, 11:46 pm
• best offer: false
• bids: 0
• Sold: 0

General radiocontrolother:

• condition: New
• in stock: Yes
• toys hobbies > radio control control line toys hobbies > other radio control

Shipping radiocontrolother:

• handling: 1 days
• cost: $0.0
• type: Calculated

Returns radiocontrolother:

• time: 30 Days
• policy: returns accepted
• type: Money Back
• details: Restocking fee: No
• paid by: Buyer

Align USHES35P01 Is Similar To:

• 4713413926190 Align One Way Bearing Trex Hs (35.9% similar) Ups: is also available. Defective items are covered by the manufacturer. Happy buying and good luck...(August 4th, 2018)
• 4713413948000 Align Frame Hardware Kit Trex Pro (34.1% similar) Defective items are covered by the manufacturer. Happy buying and good luck. Ups: is also available...(October 3rd, 2018)
• H25071 Hd200a Used Align Trex Series Same Size 250 205 Carbon Fiber 205mm Main Blades (31.7% similar) 5g set previous part H25071. Use for rex 250. Shape symmetrical wing length 205MM width 3MM shaft diameter 2MM weight 14...(June 14th, 2016)
• Hd360a Align Trex 450 L Dominator Gaui X3 360 Mm 3g Carbon Fiber Main Blades (37.8% similar) Instruction apply to TREX450 all types the 360 3g main blades are designed specifically for extreme 3d flying, featuring both high agility and excellent stability characteristics. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss. 7MM ...(June 11th, 2016)
• Servos 450 Ds410m T-rex Metal Digital Align Trex Gear (40.9% similar) All three connectors are good. DS410M metal gear digital servos. One works perfectly. Two have cracks in the cases that have been repaired with fiberglass see photos. One has insulation worn on one wire the wire is intact but the insulation is worn with the wire slightly exposed see photo. These ...(January 30th, 2015)
• H11025a Align Trex 100 Metal (47.6% similar) Fasten it from the bigger hole on main shaft mount. Red main shaft H11007 is used with X3MM screw. Fasten it from the smaller hole on main shaft mount t6 aluminum alloy material and CBC processed use for t-rex 100S 100X blue H11007A is used with X6MM screw...(June 12th, 2017)
• H25113 Align Trex 250 Pro (56.7% similar) Trex 250 pro main shaft set H25113 replacement of H25014 Align...(January 14th, 2018)
• H45025 Align Trex Pro Metal Sf Mixing Arm (42.1% similar) Trex 450 pro metal sf mixing arm H45025...(October 20th, 2018)
• H45087 Align Trex Sport Bottom Plate (50.7% similar) Trex 450 sport bottom plate H45087...(October 13th, 2018)
• H45098 Align Trex Sport Tail Boom Mount (48.6% similar) T-rex 450 tail servo mounting...(July 14th, 2018)
• H45155 Align Trex Tail Boom (54.8% similar) ...(April 17th, 2018)