1. Other Radio Control For Sale
  2. sku: 9586994303332813
  3. TREAL TLMT-13

TREAL TLMT-13 Front Steering Knuckels Losi Lmt 782125825286 7075

Tlmt-13 Treal Aluminum 7075 Front Steering Knuckels For Losi Lmt Silver

( Brand: Treal ), ( Manufacturer Part Number: TLMT-13 ), ( UPC: 782125825286 ), ( Color: Silver )

Review TREAL Aluminum 7075 Front Steering Knuckels Losi Lmt Silver

The **Treal TLMT-13 7075 Front Steering Knuckles** are a precision-engineered upgrade designed specifically for the **LOSI LMT (Large Model Truck)** series, delivering a substantial leap in performance, durability, and handling for enthusiasts seeking to push the limits of their off-road rigs. Crafted from **7075 aluminum alloy**, one of the strongest and most corrosion-resistant materials available in the hobbyist market, these knuckles are forged to exacting standards, ensuring superior strength-to-weight ratios that enhance acceleration, cornering, and overall vehicle dynamics. The **TLMT-13** designation signifies a meticulously optimized design tailored for high-stress applications, with reinforced pivot points and optimized geometry to minimize flex under heavy loads, whether tackling rough terrain, aggressive wheelie maneuvers, or relentless drift sessions. The knuckles feature **pre-drilled and tapped mounting holes**, allowing for seamless integration with a wide range of suspension components, including aftermarket bushings, ball joints, and steering linkages, while maintaining compatibility with the stock LOSI LMT chassis. Their **smooth, polished finish** not only enhances aesthetics but also reduces friction and wear on associated hardware, contributing to longer-lasting performance. Whether you're a competitive racer looking to shave precious seconds off your lap times or a hobbyist aiming to transform their LMT into a versatile off-road beast, these knuckles provide the structural integrity and responsiveness needed to conquer any challenge. Upgrade your truck with the **Treal TLMT-13 7075 Front Steering Knuckles** and experience a new level of precision, control, and reliability in your driving experience.

The **Treal TLMT-13 7075 Front Steering Knuckles** are designed for the **Losi LMT** (likely a remote-controlled off-road vehicle), offering a balance of performance and durability. Below is a detailed breakdown of their pros and cons, followed by a conclusion and recommendation.

---

### **Pros of the Treal TLMT-13 7075 Front Steering Knuckles**

1. **High-Quality Material (7075 Aluminum Alloy)**

- 7075 aluminum is one of the strongest and most durable aluminum alloys, offering superior strength-to-weight ratio compared to standard 6061 or 6063 alloys. This makes the knuckles more resistant to bending, warping, or breaking under heavy loads or rough terrain.

- The alloy is also more resistant to corrosion, which is beneficial for off-road use where exposure to dirt, mud, and moisture is common.

2. **Precision Machining and Fit**

- These knuckles are likely designed to fit the **Losi LMT** chassis with minimal clearance issues, reducing the risk of binding or misalignment. Proper machining ensures smoother steering and less play in the suspension.

- The knuckles may feature precise bushings or bearings, improving steering responsiveness and reducing wear on other suspension components.

3. **Compatibility with Upgrades**

- The 7075 alloy construction allows for easier modification, such as adding reinforced bushings, upgraded ball joints, or custom suspension linkages. This makes the knuckles a good choice if you plan to further customize your LMT.

- The design may accommodate aftermarket steering components, such as upgraded tie rods or adjustable steering arms.

4. **Durability for Off-Road Use**

- Off-road vehicles like the LMT often experience extreme stresses from jumps, rough terrain, and heavy impacts. The 7075 alloy provides better shock absorption and structural integrity compared to cheaper alternatives, reducing the likelihood of catastrophic failure.

- The knuckles may also be designed with reinforced sections or heat-treated for added toughness.

5. **Lightweight Compared to Steel**

- While aluminum is not as strong as steel on a per-weight basis, 7075 aluminum is significantly lighter than steel knuckles. This reduces unsprung weight, which can improve handling, acceleration, and overall vehicle dynamics.

- Lighter knuckles also put less strain on the motor and drivetrain, potentially extending the lifespan of other components.

6. **Aesthetic Appeal**

- The polished or anodized finish of 7075 aluminum knuckles often looks more premium and professional compared to standard plastic or stamped steel parts. This can be appealing if appearance matters to you.

7. **Reduced Vibration and Noise**

- High-quality aluminum parts tend to dampen vibrations better than plastic or thin steel, leading to a quieter and smoother ride, especially at high speeds or over rough terrain.

---

### **Cons of the Treal TLMT-13 7075 Front Steering Knuckles**

1. **Higher Cost**

- 7075 aluminum is more expensive to manufacture than standard aluminum alloys or plastics. This makes the knuckles significantly pricier than OEM or aftermarket alternatives made from cheaper materials.

- The cost may be prohibitive for budget-conscious builders or hobbyists who prioritize performance over material quality.

2. **Potential for Overkill**

- If you primarily use your LMT on smooth tracks or light off-road conditions, the extra strength of 7075 may not be necessary. For casual driving, cheaper knuckles (e.g., 6061 aluminum or reinforced plastic) might suffice without sacrificing performance.

- The added weight of 7075 (compared to carbon fiber or high-end plastics) could be negligible, but it s still a consideration for those optimizing for speed or agility.

3. **Installation Complexity**

- Aluminum knuckles may require more precise alignment during installation compared to plastic or stamped parts. Improper installation could lead to binding, uneven wear, or premature failure.

- If you re not experienced with suspension setup, you may need to invest time or money in professional installation or consulting resources.

4. **Potential for Bushings or Bearings to Wear**

- While the knuckles themselves are durable, the bushings or bearings they use may still wear out over time, especially under heavy loads. High-quality bushings (e.g., polyurethane or rubber) can mitigate this but add to the cost.

- If the knuckles are not paired with compatible suspension components, wear could accelerate, negating the benefits of the 7075 alloy.

5. **Limited Availability of Replacement Parts**

- If the knuckles fail or require maintenance, finding replacement parts (e.g., bushings, bolts, or seals) might be harder than for more common aftermarket parts. You may need to source from specialty suppliers.

- The LMT may not have a large aftermarket, so compatibility with other brands components could be limited.

6. **Potential for Over-Tightening Risks**

- Aluminum can be more prone to stripping or cracking if bolts are overtightened. This requires careful attention during installation to avoid damaging the knuckles or threads.

- Unlike steel, aluminum does not deform as visibly under stress, so subtle cracks or stress points may go unnoticed until failure occurs.

7. **Weight Consideration for Small Vehicles**

- While 7075 aluminum is lighter than steel, it is still heavier than some high-end plastics or carbon fiber alternatives. For very small or lightweight RC vehicles, the added weight might slightly reduce acceleration or handling precision.

---

### **Conclusion**

The **Treal TLMT-13 7075 Front Steering Knuckles** are an excellent choice for **Losi LMT** owners who prioritize **durability, strength, and long-term performance**, especially for aggressive off-road use, jumps, or heavy-duty driving. The 7075 aluminum alloy provides a significant upgrade over standard parts, offering better resistance to bending, warping, and corrosion while maintaining a reasonable weight. These knuckles are ideal for:

- Enthusiasts who push their vehicles to the limit.

- Builders who want to future-proof their suspension with high-quality components.

- Those who prefer a premium feel and reduced maintenance concerns over time.

However, the **higher cost** and **potential overkill for casual use** make them less suitable for budget builds or light-duty applications. If you re not planning to abuse your LMT or lack experience with suspension setup, cheaper alternatives (e.g., reinforced plastic or 6061 aluminum knuckles) may offer adequate performance without the premium price.

---

### **Recommendation**

**Buy the Treal TLMT-13 7075 Front Steering Knuckles if:**

- You frequently drive your LMT on rough terrain, perform jumps, or subject it to heavy loads.

- You want to invest in long-term durability and reduce the risk of suspension failure.

- You plan to upgrade other suspension components (e.g., bushings, springs) and want knuckles that can handle the stress.

- You prioritize a premium feel and are willing to pay for high-quality materials.

**Avoid or Consider Alternatives if:**

- Your budget is tight, and you can achieve similar performance with cheaper knuckles (e.g., from other brands like **HPI Racing, Team Associated, or custom CNC-machined parts**).

- You primarily use your LMT on smooth tracks or lightly off-road, where standard parts would suffice.

- You lack experience with suspension setup and are concerned about installation complexity or potential alignment issues.

**Final Verdict:**

For the **Losi LMT**, the **Treal TLMT-13 7075 Front Steering Knuckles** are a **strong, high-performance upgrade** worth the investment if you demand reliability and durability. If you re unsure, test them on a backup vehicle or compare them with other brands (e.g., **HPI s aluminum knuckles**) to see if the price difference justifies the upgrade for your specific use case.

Details:

Treal Aluminum 7075 Front Steering Knuckels for Losi LMT Silver: Color: Silver, Brand: Treal, MPN: TLMT-13, UPC: 6, EAN: 86,: Package Dimensions: 5.24 x 3.31 1.5 inches. Manufacturer: Treal Hobby. Precision dimension control. Manufacturer recommended age: 12 months and up.

Four color options. Item model number: TLMT-13. Material: Aluminum 7075.bearing size to increase the durability.

Processing: Complete CNC Billet Machined.

part #: tlmt13 price

  • $49.99

specifications radiocontrolother:

  • brand: Treal
  • mpn: Tlmt-13
  • upc: 782125825286
  • color: Silver

seller radiocontrolother:

  • rating: 99.8%
  • city: San Bernardino, CA
  • # reviews: 1189

general radiocontrolother:

  • condition: New
  • Toys Hobbies > Radio Control Control Line > Other RC Control Line

returns radiocontrolother:

  • method: Money back
  • time: 30 Days
  • paid by: Seller
  • policy: Returns Accepted

payments radiocontrolother:

  • other
  • credit card: Discover
  • wallet: Apple-pay

shipping radiocontrolother:

  • cost: $0.00
  • transit: 4-10 Days
  • service: Standard
  • type: Fixed
  • class: Standard

offer radiocontrolother:

  • quantity: 2
  • sold: 0
  • options: Ship-to-home
  • availability: In Stock
  • started: May 1, 2026
category: toys & hobbies > toys hobbies > radio control line > rc control line, color: silver, sku: 9586994303332813,
Treal TLMT-13 Is Similar To:
radiocontrolother logo
1 offer $49.99 USD
  • New. Offer #1 priced at $49.99 + $4.99 shipping estimate = $54.98* total. +$4.99 shipping

Copyright © radiocontrolother.com