RC8EM 1150303 Minicube Blheli Esc Dshot Flysky Receiver Ibus F3 2S BB2 6A

( Brand: Rc8em ), ( Manufacturer Part Number: 1150303 ), ( Model: MINICUBE ), ( Part Type: Receiver )

Review RC8EM Minicube F3 2s Blheli Bb2 6a Esc Dshot Flysky Receiver Ibus

The 1150303 Minicube F3 2S BLHeli_BB2 6A ESC is a high-performance electronic speed controller (ESC) designed for mini quadcopters and drones. This ESC is equipped with the latest BLHeli_BB2 firmware, which provides smooth and efficient power management, as well as advanced features such as DShot and On-Shot ESC timing, which help to improve the responsiveness and control of your quadcopter.

The Minicube F3 2S BLHeli_BB2 6A ESC is a 2S (7.4V) compatible ESC, which means it can power dual-cell LiPo batteries. It features a 6A continuous current rating, which is more than enough to handle high-power motors and provide plenty of thrust for your mini quadcopter. The ESC is also equipped with a sophisticated BEC (Battery Eliminator Circuit) that can provide up to 1A of stable 5V output, which is perfect for powering your receiver and other accessories.

The Minicube F3 2S BLHeli_BB2 6A ESC is equipped with a Flysky IBUS receiver, which is a high-performance receiver that supports IBUS protocol. The IBUS protocol provides real-time telemetry data, such as battery voltage, current, and temperature, to your transmitter, which can help you to monitor the status of your quadcopter and ensure safe and efficient flying. The receiver is also compatible with other popular transmitter brands, such as FrSky, which makes it a versatile option for many quadcopter enthusiasts.

Overall, the 1150303 Minicube F3 2S BLHeli_BB2 6A ESC is a powerful and versatile ESC that is perfect for mini quadcopters and drones. Its advanced features, high current rating, and compatibility with popular transmitter brands make it a great choice for both beginners and experienced pilots looking to upgrade their quadcopter's power system.

1. BLHeli_BB2 firmware: This ESC supports BLHeli_BB2 firmware, which is known for its advanced features and high efficiency.

2. DShot support: The ESC supports DShot protocol, which allows for faster and smoother motor control, reducing motor noise and improving overall performance.

3. 6A continuous current: The ESC can provide 6A of continuous current to the motors, which is sufficient for most micro quadcopters.

4. IBUS receiver: The RC8EM receiver is an integrated receiver that supports IBUS protocol, which allows for easier configuration and more reliable operation.

1. Limited voltage range: The ESC is only compatible with 2S LiPo batteries, which may limit the size and power of the quadcopter.

2. Not suitable for high-power applications: With a maximum continuous current of 6A, this ESC may not be suitable for high-power quadcopters or for heavy-duty applications.

3. Limited compatibility: The ESC may not be compatible with all RC transmitters or flight controllers, so it may require additional hardware or software configuration.

The 1150303 Minicube F3 2S BLHeli_BB2 6A ESC with Flysky RC8EM receiver is a good choice for entry-level micro quadcopters that require reliable and efficient motor control. Its support for BLHeli_BB2 firmware and DShot protocol makes it a good choice for those who are looking for advanced features and smooth operation. However, its limited voltage range and continuous current may limit its compatibility and suitability for high-power applications.

If you are looking for a reliable and efficient ESC for your micro quadcopter, the 1150303 Minicube F3 2S BLHeli_BB2 6A ESC with Flysky RC8EM receiver is a good choice. However, make sure to check its compatibility with your specific RC transmitter and flight controller before purchasing. Additionally, consider the voltage range and continuous current requirements of your quadcopter to ensure that this ESC is suitable for your needs.

Details:

Current: 6 Max current 10s: 10 input voltage : 2s Lepke: no programming pass-through ready firmware: blheli firmware target: omnibuses dshot protocol compatible need not modify subs ppm dam 2 x input pin headers 4pwm output super tiny only 20x20mm, mount holes 15x15mm m2 screws pi sensor mpu60002-4s lip direct power5v 1a Beck 6a in 1 esc: model: bs06dcon. 1g-compatible transmitter: compatible with fs-i4, fs-i6, fs-i6s, fs-i6x, fs-i10, fs-gt2e, fs-gt2g, fs-gt2f features: stm32 f303mcu blheli esc make your operating feel more stably and silky-jaw-dropping flight performance-led strip solder pin-buzzer pin-beta flight support-acre mode air angle support package included: compatible frisky receiver version: 1x 6dof f3 control 2x 6a 2 in 1 cables bag of screws dam x flysky.

7g not include wire size:20 mm mount hole: 15mm m2 compatible flysky receiver manual -channels: ibus 10ch ppm 8ch model type: multi-rotor-frequency range: 2.

specifications radiocontrolother:

• brand: Rc8em
• mpn: 1150303
• model: Minicube
• part type: Receiver

Payments radiocontrolother:

• PayPal

Shipping radiocontrolother:

• cost: $0.0
• handling: 1 days
• type: Flat

Ratings:

1. excellent transaction, would deal with again 12-19-17
2. A, great product and a very reasonable and responsive. 12-21-17
3. Awesome transaction. Super fast payment 12-20-17
4. good product fast shipper 12-20-17
5. Thank you for an easy, pleasant transaction. Excellent buyer.. 12-21-17

Returns radiocontrolother:

• details: Item must be in the same original condition to receive a refund. Professional installation required.
• policy: returns accepted
• time: 14 Days
• paid by: Buyer
• type: Money Back

Offer radiocontrolother:

• Started: December 23, 2017, 7:00 pm
• bids: 0
• best offer: true
• Sold: 0
• quantity: 4

Seller radiocontrolother:

• city: Agoura Hills, California
• zipcode: 91301

General radiocontrolother:

• in stock: Yes
• condition: New
• toys hobbies > radio control control line toys hobbies > other radio control